Sunday, 19 July 2015

More electrical systems

The system needs some working out.  in the picture below from the left is my 24v CTEK charger below that a split charge relay.  next to that a Sterling 1600W inverter. next to that a 12 and 24 v take off with the respective fuse bank beside each.  the system will be 24v with the 12v system supplied through a 24 to 12v converter sited above the fuses.  turn the corner and we have a mains consumer unit with the solar isolator above.  Next to that on a red key is the inverter isolator switch then next to that my solar controller.

No comments:

Post a Comment